Double Vanity Tops – To put together a number vanity with a single cabinet door is a simple building project, where you can create an attractive finished project as well as start learning as you can make a cabinet. A number vanity requires only the construction of a sliding door and no drawers, so it’s a great place to start learning furniture knitting skills
Build the foundation for your cabinet. Double Vanity Tops To do this you must first calculate the dimensions. For simplicity we will say that our vanity comes 31 1/2 inches and 34 inches in height. The dimensions may vary to be individual taste, but this is a good standard size for the project. This will make our cutting easier and eliminates the need for extra ripping. Cut the boards for the base. A good layer of wood for this is 1 x 4 clear pines. Remember, your base will be smaller than the actual cabinet.
You also need four braces that are six inches tall and angled at 45 degrees at each end. Put the base unit together. First screw the four long pieces together. First sinker, then use a pilot hole and then screw the base together so that the screws go all the way into the woods. The base will still be flexible at this point, but when you connect the four braces to the corners, the base should be rigid. Again, Double Vanity Tops pre-drill and replace the screws. With four per bass should suffice. There are two per page.